Search
  • Heat Pump Thermostat – Guide to Buy The Right Thermostat 2022-07-07
    JANUARY 13, 2022 Heating and cooling systems installed in a home may vary from central furnaces, boilers, electric baseboards to heat pumps. The most common type of heating/cooling (HVAC) system used in the USA is the central furnace  – which may be singles stage or multi-stage. A heat pump is used in regions with a moderate climate, where summer/winter is not that extreme at any time. In this article, we guide you through heat pump thermostat models, ideal to control the heat pump in your home. As I wrote above, a majority (90%) of homes in the USA rely on central furnace based systems, or boiler-based systems or heat pump systems. Only about 10% of homes in America use electric baseboards for heating (these homes would be either old constructions or located in places where electricity is cheap). In regions with a moderate climate, a heat pump (with emergency heat) alone is usually enough for home heating/cooling. Homes located in extreme weather regions often use a heat pu...
  • Thermostats And Heat Pumps 2022-08-11
    Instead of relying on a standard furnace for heating and a separate air conditioner for cooling, install a heat pump. However, if you plan on using a heat pump to control your home's climate year round, you'll need the right thermostat.   So, what's the difference between a heat pump and a furnace and why does it matter? For a furnace to function, it relies on gas or oil for fuel. In comparison, a heat pump uses electricity and refrigerant, which is usually less expensive.   If you choose a heat pump system, it is ideal for homes in areas that don't get too cold, as heat pumps don't generate as much heat as a traditional furnace. Also, a heat pump transfers heat and requires less energy than a heat-generating furnace.   Be advised, if you will ever experience prolonged periods where the temperatures fall below freezing, you will want a secondary heat source to take over. Heat pumps warm a home by drawing outside heat inside and using electricity.   Ecobay has focuse...
  • Are Thermostats Universal? 2022-08-29
    When it comes to thermostat series products, they are not all one-size-fits-all. You have to look over your choice of thermostat before attempting to install it with a heat pump, furnace, or another type of HVAC system. There are no universal thermostats.   Thermostats designed for a heat pump will have specific modes listed on the back or will contain wiring for the reversing valve, emergency, and other settings. However, the average thermostat for a furnace or boiler is different.   Don't make the mistake of thinking you can utilize any thermostat with your HVAC system. Also, be aware that there are smart thermostats that may require integration with your internet-connected devices or other needs to function.   Some thermostats are programmable, which allows you to set your HVAC system as you desire at specific points throughout your day. Other cost-effective thermostats are manual and require you to set it to cooling, heating, or fan.   Ecobay has focused on ther...
  • an You Add A Heat Pump To An Existing AC Unit Or Furnace? 2022-09-01
    A centralized temperature-controlling system can make managing indoor heating more convenient than before. Now you’re wondering if you can install a heat pump on an existing furnace. Additionally, is it possible to add a heat pump to an AC unit? We researched for you and consulted with industry experts to give you the following answer. It’s possible to add a heat pump to an existing cooling or heating system. However, homeowners need to think about certain factors to accomplish a proper installation. The nature of the existing indoor temperature control system, the home’s ductwork, and electrical wiring are some elements that may or may not allow these setups. Proceeding with these projects often requires sufficient knowledge about different matters, including wiring electronics. Continue reading as we talk about the process to wire a heat pump to a furnace in closer detail. We’ll also tackle the possibility of adding a heating unit to an air conditioner.
  • Can A Heat Pump Be Installed With An Existing Furnace? 2022-09-01
    You can install a heat pump to an existing gas furnace by using a dual fuel system. This framework uses a split or packaged unit to pull energy from two sources: electricity and gas. The resulting construct combines the heating consistency of the existing gas furnace and the heat pump’s improved temperature-providing performance.
  • At What Temperature Do Heat Pumps Become Ineffective? 2022-09-05
    At What Temperature Do Heat Pumps Become Ineffective? Heat pumps generally become ineffective if the outside temperature falls between 25 to 30 degrees Fahrenheit. At this temperature range, the air in the area should freeze moisture. In turn, the potency of a typical heat pump would lose efficiency as it struggles to supply warmth. Properties in regions that experience this issue might install backup heating systems. These options may include: Natural gas furnace: Ideal for emergency heating without the worry of paying for significant electricity costs. Electric heat strips: Supplementary heating sources with fairly reasonable pricing structures. Although, these products might only increase the supplied heat up to a certain extent.
  • How Much Does It Cost To Add A Heat Pump? 2022-09-22
    A heat pump’s overhead often depends on its type. The following are the average costs to expect when purchasing and installing a new heat-pumping system: Geothermal: $13,000 to $36,000 Gas: $4,300 to $8,000 Air-Source: $3,300 to $7,500 Ductless Mini-Split System: $1,500 to $5,000 Other factors that influence the total costs of adding a heat pump include: Size Brand Seasonal Energy Efficiency Ratio (SEER) Heating Seasonal Performance Ratio (HSPF) Professional Labor If you’re looking at furnaces, keep in mind that these heating systems don’t usually use SEER ratings to measure their supplied heat. 
  • What Is Cheaper To Run Heat Pump Or Gas Furnace? 2022-09-22
    Some scenarios entail running heat pumps to be less expensive than using gas furnaces. However, some cases might also create ideal cost-effective setups to allow gas furnaces to require fewer expenses than heat pumps. It’s advisable to look at this matter in terms of value instead of overall expenses. For instance, gas furnaces often provide better value than heat pumps. Homeowners using natural gas-powered furnaces can expect to pay $260 to $1,550 in annual energy costs for these systems. That range fits well into the national average of paying $661 in natural gas costs. On the other hand, a sealed-system boiler may deliver reduced heating costs. Moreover, this option is usually less laborious to install than other heating frameworks. In turn, installation, maintenance, and usage expenses are generally less expensive with the boiler than other heating systems. But you may also save money on professional labor costs if you opt for DIY installation and maintenance procedures. If s...
  • Ductless, mini-split-system heat pump 2022-11-02
    Ductless, mini-split-system heat pumps (mini-splits) make good retrofit add-ons to houses with "non-ducted" heating systems, such as hydronic (hot water heat), radiant panels, and space heaters (wood, kerosene, propane). They can also be a good choice for room additions where extending or installing distribution ductwork is not feasible, and for very efficient new homes that require only a small space conditioning system. Be sure to choose an ENERGY STAR® compliant unit and hire an installer familiar with the product and its installation. Like standard air-source heat pumps, mini-splits have two main components -- an outdoor compressor/condenser and an indoor air-handling unit. A conduit, which houses the power cable, refrigerant tubing, suction tubing, and a condensate drain, links the outdoor and indoor units.
  • Ecobay Thermostats for Heat Pumps – Things You Need To Consider 2022-12-16
    Heat pumps have garnered a lot of attention over the years thanks to the duality of their core functions. In winter, heat pumps work like a heater and look after your heating and hot water requirements whereas, in summer, they can transform into an air-conditioning unit. This two-in-one heating and cooling function is not common in traditional boilers and heating systems, which makes air and ground source heat pumps stand out as all-purpose performers. Thanks to their specialised heating and cooling features, heat pumps need bespoke thermostats to work effectively. The thermostat technology has developed significantly over the years, giving you energy-efficient options that can be paired with your heat pump installation for great heating performance.  Before we delve deeper into how to choose the perfect thermostat for your heat pump, let’s find out more about how it works.  Thermostats for Heat Pump – How They Work! Thermostats for heat pumps have one simple job ...
  • Heat Pump Thermostats 2023-09-20
    Heat Pump Thermostats Heat pump thermostats control the reversing valve (O/B) on the heat pump, using the compressor for heating and air conditioning. Because heat pumps control both heating and cooling, a heat pump thermostat is necessary for reversing the valve to the correct direction flow of refrigerant.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp