Search
  • How Much Does It Cost To Add A Heat Pump? 2022-09-22
    A heat pump’s overhead often depends on its type. The following are the average costs to expect when purchasing and installing a new heat-pumping system: Geothermal: $13,000 to $36,000 Gas: $4,300 to $8,000 Air-Source: $3,300 to $7,500 Ductless Mini-Split System: $1,500 to $5,000 Other factors that influence the total costs of adding a heat pump include: Size Brand Seasonal Energy Efficiency Ratio (SEER) Heating Seasonal Performance Ratio (HSPF) Professional Labor If you’re looking at furnaces, keep in mind that these heating systems don’t usually use SEER ratings to measure their supplied heat. 
  • What Is Cheaper To Run Heat Pump Or Gas Furnace? 2022-09-22
    Some scenarios entail running heat pumps to be less expensive than using gas furnaces. However, some cases might also create ideal cost-effective setups to allow gas furnaces to require fewer expenses than heat pumps. It’s advisable to look at this matter in terms of value instead of overall expenses. For instance, gas furnaces often provide better value than heat pumps. Homeowners using natural gas-powered furnaces can expect to pay $260 to $1,550 in annual energy costs for these systems. That range fits well into the national average of paying $661 in natural gas costs. On the other hand, a sealed-system boiler may deliver reduced heating costs. Moreover, this option is usually less laborious to install than other heating frameworks. In turn, installation, maintenance, and usage expenses are generally less expensive with the boiler than other heating systems. But you may also save money on professional labor costs if you opt for DIY installation and maintenance procedures. If s...
  • Heat Pump Systems 2022-09-22
    Heat pumps offer an energy-efficient alternative to furnaces and air conditioners for all climates. Like your refrigerator, heat pumps use electricity to transfer heat from a cool space to a warm space, making the cool space cooler and the warm space warmer. During the heating season, heat pumps move heat from the cool outdoors into your warm house.  During the cooling season, heat pumps move heat from your house into the  outdoors. Because they transfer heat rather than generate heat, heat pumps can efficiently provide comfortable temperatures for your home.    Ecobay has focused on thermostat research for 20 years, high-quality thermostats that work with google home, Heat Pump Thermostat, tuya zigbee 3.0 smart radiator actuator. We look forward to your consultation and cooperation.
  • Ducted Air-Source Heat Pumps 2022-10-09
    There are three main types of heat pumps connected by ducts: air-to-air, water source, and geothermal. They collect heat from the air, water, or ground outside your home and concentrate it for use inside.  The most common type of heat pump is the air-source heat pump, which transfers heat between your house and the outside air. Today's heat pump can reduce your electricity use for heating by approximately 50% compared to electric resistance heating such as furnaces and baseboard heaters. High-efficiency heat pumps also dehumidify better than standard central air conditioners, resulting in less energy usage and more cooling comfort in summer months. Air-source heat pumps have been used for many years in nearly all parts of the United States, but until recently they have not been used in areas that experienced extended periods of subfreezing temperatures. However, in recent years, air-source heat pump technology has advanced so that it now offers a legitimate space heating alte...
  • Ductless Air-Source Heat Pumps 2022-10-09
    For homes without ducts, air-source heat pumps are also available in a ductless version called a mini-split heat pump. In addition, a special type of air-source heat pump called a "reverse cycle chiller" generates hot and cold water rather than air, allowing it to be used with radiant floor heating systems in heating mode.
  • Geothermal Heat Pumps 2022-10-14
    Geothermal (ground-source or water-source) heat pumps achieve higher efficiencies by transferring heat between your house and the ground or a nearby water source. Although they cost more to install, geothermal heat pumps have low operating costs because they take advantage of relatively constant ground or water temperatures. Geothermal (or ground source) heat pumps have some major advantages. They can reduce energy use by 30%-60%, control humidity, are sturdy and reliable, and fit in a wide variety of homes. Whether a geothermal heat pump is appropriate for you will depend on the size of your lot, the subsoil, and the landscape. Ground-source or water-source heat pumps can be used in more extreme climates than air-source heat pumps, and customer satisfaction with the systems is very high.
  • Absorption Heat Pumps 2022-10-14
    A relatively new type of heat pump for residential systems is the absorption heat pump (AHP), also called a gas-fired heat pump. Absorption heat pumps use heat or thermal energy as their energy source, and can be driven with a wide variety of heat sources such as combustion of natural gas, steam solar-heated water, air or geothermal-heated water, and therefore are different from compression heat pumps that are driven by mechanical energy. AHPs are more complex and require larger units compared to compression heat pumps. The lower electricity demand of such heat pumps is related to the liquid pumping only. 
  • Advanced Features to Look for in a Heat Pump 2022-10-18
    A number of innovations are improving the performance of heat pumps. Unlike standard compressors that can only operate at full capacity, two-speed compressors allow heat pumps to operate close to the heating or cooling capacity needed at any particular outdoor temperature, saving energy by reducing on/off operation and compressor wear. Two-speed heat pumps also work well with zone control systems. Zone control systems, often found in larger homes, use automatic dampers to allow the heat pump to keep different rooms at different temperatures. Some models of heat pumps are equipped with variable-speed or dual-speed motors on their indoor fans (blowers), outdoor fans, or both. The variable-speed controls for these fans attempt to keep the air moving at a comfortable velocity, minimizing cool drafts and maximizing electrical savings. It also minimizes the noise from the blower running at full speed. Some high-efficiency heat pumps are equipped with a desuperheater, which recovers waste hea...
  • Air-source heat pump 2022-10-18
    An air-source heat pump can provide efficient heating and cooling for your home. When properly installed, an air-source heat pump can deliver up to three times more heat energy to a home than the electrical energy it consumes. This is possible because a heat pump transfers heat rather than converting it from a fuel like combustion heating systems. Air heat pumps have been used for many years in nearly all parts of the United States, except in areas that experienced extended periods of subfreezing temperatures. However, in recent years, air-source heat pump technology has advanced so that it now offers a legitimate space heating alternative in colder regions. For example, a study by the Northeast Energy Efficiency Partnerships found that when units designed specifically for colder regions were installed in the Northeast and Mid-Atlantic regions, the annual savings are around 3,000 kWh (or $459) when compared to electric resistance heaters, and 6,200 kWh (or $948) when compared to oil sy...
  • Types of Air-Source Heat Pumps 2022-10-24
    The different types of air source heat pumps are described below. Ductless vs. Ducted vs. Short-Run Ducted Ductless applications require minimal construction as only a three-inch hole through the wall is required to connect the outdoor condenser and the indoor heads. Ductless systems are often installed in additions. Ducted systems simply use ductwork. If your home already has a ventilation system or the home will be a new construction, you might consider this system. Short-run ducted is traditional large ductwork that only runs through a small section of the house.  Short-run ducted is often complemented by other ductless units for the remainder of the house. Split vs. Packaged Most heat pumps are split-systems—that is, they have one coil inside and one outside. Supply and return ducts connect to the indoor central fan. Packaged systems usually have both coils and the fan outdoors. Heated or cooled air is delivered to the interior from ductwork that passes through a wall or...
  • How heat pump system Work 2022-10-24
    A heat pump's refrigeration system consists of a compressor and two copper or aluminum coils (one indoors and one outside), which have aluminum fins to aid heat transfer. In heating mode, liquid refrigerant in the outside coil removes heat from the air and evaporates into a gas. The indoor coil releases heat from the refrigerant as it condenses back into a liquid. A reversing valve, near the compressor, can change the direction of the refrigerant flow for cooling mode as well as for defrosting the outdoor coil in winter. The efficiency and performance of today's air-source heat pumps is a result of technical advances such as the following: Thermostatic expansion valves for more precise control of the refrigerant flow to the indoor coil Variable speed blowers, which are more efficient and can compensate for some of the adverse effects of restricted ducts, dirty filters, and dirty coils Improved coil design Improved electric motor and two-speed compressor designs Copper tubing, groo...
  • Selecting a Heat Pump 2022-10-24
    Every residential heat pump sold in this country has an EnergyGuide label, which displays the heat pump's heating and cooling efficiency performance rating, comparing it to other available makes and models. Heating efficiency for air-source electric heat pumps is indicated by the heating season performance factor (HSPF), which is a measure over an average heating season of the total heat provided to the conditioned space, expressed in Btu, divided by the total electrical energy consumed by the heat pump system, expressed in watt-hours. Cooling efficiency is indicated by the seasonal energy efficiency ratio (SEER), which is a measure over an average cooling season of the total heat removed from the conditioned space, expressed in Btu, divided by the total electrical energy consumed by the heat pump, expressed in watt-hours. In general, the higher the HSPF and SEER, the higher the cost of the unit. However, the energy savings can return the higher initial investment several times during ...
1 2 3 4

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp